If you have a big place where internet connectivity cannot reach every corner of the house, then a mesh system is required.
A Wi-Fi mesh extends your Wi-Fi range so it can reach every part of your house. Many people prefer using the Eero mesh systems because of the performance they provide over the cost they come at.
Though Eero products are exceptionally good, but not issue-free. You may encounter issues like Blue light blinking on the Eero, and if you are reading this article, then you are probably a victim of this issue. This article will guide you on how you can fix Error Blinking Blue Light.
What Causes Blinking Blue Light on Eero?
If you see a blinking blue light on your Eero device then that means the device is broadcasting Bluetooth right now. When you see the blue light blinking on Eero then know that is in pairing mode and you can connect it to your Bluetooth device.
In some Eero devices, you may see a solid blue light instead of a blinking light. If you see the solid blue light then that means the device is ready to be paired. You can pair the device with the Eero app.
The blinking blue light is not a problem but indicates Bluetooth broadcast. But this becomes a problem if you have tried pairing it with Bluetooth but nothing changes.
Troubleshooting Steps to Fix Eero Blinking Blue Light
Eero blinking blue light is something to be worried about if the blue light keeps blinking for a very long time. If you are worried about this issue and want to fix it ASAP, then you can carry on with the steps we have mentioned below to fix the issue-
1. Ensure Your Internet Service is Not Down
You are likely to face this issue with your Eero if your internet service is down. This can happen if something is wrong at the ISP’s end or when your internet is going under scheduled maintenance.
Also, check if you have paid your internet bill. If you have any pending bills hanging on you then your ISP will temporarily cut down your internet connection and you can face this issue.
Ensure there’s no bill pending and you have paid all your dues timely. If there’s no pending bill and you are still facing issues with the internet connectivity then you must contact your ISP and ask them what’s going on with your network. If your network is going through routine maintenance then you will have to wait until the issue is resolved.
2. Restart Eero Device
If your internet is not down but you are still facing the Eero blue light blinking issue then you should consider restarting or power cycling your Eero device. Below are the steps to do it-
- Press the power button to turn off your device.
- Let the device turn off completely and then unplug the power cable connecting your Eero device to the power socket.
- Stay hold for a minute or two and then plug back the power cable.
- Now, press the power button to turn on the device.
3. Check for Faulty Cables
Loose or damaged cables can also cause this issue. Check all the cables connected to the Eero for damages. If the cable is damaged then you will have to replace it with the new one to solve the issue. Until the cable is not replaced, you will keep on facing the Eero blinking blue light issue.
4. Restart Eero Network
With the Eero app, you can restart your complete Eero network with just one tap. This will refresh the network and start fresh. You can try restarting the Eero network by following the steps given below to fix this issue-
- Open the Eero app on your phone and head to its Settings.
- After this, select Advanced Options.
- Now, tap on Restart, and then select the Reset Network option.
- Tap on Restart Network again to restart your complete network.
After the restart, the network will be refreshed and you should no longer face the issue. You can only continue with the above steps if your network is online.
If it is not then you will have to go through the traditional way of unplugging the power cable from all your Eero devices and connecting them back to the power source after a few seconds.
5. Soft Reset Eero Device
Another troubleshooting step that should probably help fix this issue is soft resetting the Eero device. Soft resetting does nothing more than clearing the network configuration.
This will not affect your Eero network, i.e., your device will not be removed from the network and should solve the issue. Given below are the steps to soft reset the Eero device-
- Ensure your Eero device is turned on.
- Look for the reset button and press and hold it until the yellow light appears. This should appear after 5-10 seconds.
- Once you see the yellow light flashing, release the button.
- Now the light should turn solid white and the soft reset should be completed.
6. Hard Reset Eero Device
The soft reset should most probably fix the issue but if it didn’t then you are left with no other option than to hard reset your Eero device.
Before you proceed with this step do note that this will remove your device from the Eero network and clear the network configurations along with the custom settings that you might have done.
The steps below discuss how you can hard reset your Eero device-
- Turn on your Eero device and press and hold the reset button.
- You will have to hold down the button until you see the red light on the device. The light should start flashing after 20 seconds, so hold the button for that time.
- After the red light appears, unhold the button.
- The device should start flashing the blinking blue light, but this time it will be for setting up the device with the Eero network.
7. Contact Customer Support
If nothing helps then you should get on with contacting the customer support of the Eero. The issue can be encountered if the hardware of your Eero device is faulty or if there are some serious issues with the device.
In that case, your device has to be replaced, but for that, you will have to get in touch with the Eero support team.
That’s it with this guide; we hope that the troubleshooting steps mentioned in this article solve the Eero blinking blue light issue.
You can contact Eero customer support as we have discussed above if the issue is not fixed by the steps listed above. The customer support team will handle your case and fix your issue.